Oppo appears to be working on another K10-series smartphone. On China’s TENAA certification website, an alleged handset with the model number PGIM10 has been discovered, which is thought to be the rumored Oppo K10 Pro. It could be powered by a Qualcomm Snapdragon 888 SoC, according to the listing. The smartphone is said to be equipped with a 4,880mAh dual-cell battery that supports up to 80W fast charging.
WHYLAB, a tipster, discovered the alleged TENAA listing and shared the information on Weibo. It contains the technical specifications for a 5G smartphone with the model number PGIM10, which is thought to be the Oppo K10 Pro. Oppo has yet to release any official information about this device.
Specifications and features of the Oppo K10 Pro (expected)
The Oppo K10 Pro will include a 6.62-inch Samsung E4 AMOLED display with a Full-HD+ (2,400×1,080 pixels) resolution, 120Hz refresh rate, and a 20:9 aspect ratio. There might be a hole-punch cutout on the front, as well as an under-screen fingerprint sensor. The phone might be powered by a Qualcomm Snapdragon 888 processor with an Adreno 660 GPU. It’ll include 8GB and 12GB of RAM, as well as 128GB and 256GB of internal storage. The phone is said to come with a 4,880mAh dual-cell battery that supports 80W rapid charging.
According to reports, an Oppo smartphone with 67W fast charging has received 3C certification.
The phone could have a triple rear camera setup, with a 50-megapixel Sony IMX766 sensor at the center, an 8-megapixel ultra-wide sensor, and a 2-megapixel secondary sensor. There will also be a 16-megapixel selfie camera. The phone is projected to be 162.775.78.68mm in length and weigh roughly 196g.
According to reports, the Oppo K10 Pro has a plastic frame with an AG glass back cover. It’s possible that it’ll come in three colours: blue, black, and white.